G-force display up to 8G
Flight summary display of Altitude, speed, range, distance traveled, current and G-force
Six display modes. Advanced, simple, radar, Raw sensor inputs, GPS signal and no OSD screen
Display GPS satellites in view signal level and position
User can configure the OSD display width
Metric/imperial units selection
Configuration of all OSD parameters via infrared control, physical access to the OSD board not needed for configuration, no computer required
Configuration of in-flight menu items via RC transmitter, only one extra auxiliary channel required for accessing all OSD-autopilot options
On screen display items can be enabled-disabled or moved to different positions
Range warning
Voltage warning
Battery capacity warning
Lost signal warning
RSSI level warning
Elevation warning
GPS fail warning
Autopilot modes, Return home, Level flight, Heading hold, Position hold, Fly by wire and waypoint navigation.
Is possible to set up to 15 3D waypoints via remote control
Programmable virtual fence to keep airplane at safe distance on waypoint navigation mode
Automatic return home if virtual fence distance exceeded, RC signal lost or latest waypoint reached
Automatic selection of PAL NTSC
Buffered video input and output processing, plug and play with all FPV cameras
Integrated GPS backup battery
Integrated temperature sensor, external temperature sensor optional
Current draw 85mA@12V
Provides filtered voltage 5V or 12V for both camera and video transmitter
Automatic selection of voltage input from higher voltage battery
Adjust of most autopilot features via configuration wizard
Dual level throttle management on autopilot mode for optimum battery usage
Upgradeable firmware
Home setting automatically
Detects R/C link lost by glitch counter or failsafe level
Detection of failsafe on the throttle channel configurable for over or under normal throttle range
Display estimated maximum range left
Board position can be configured by software to be rolled 0-90-180-270°, front-rear can be reversed also
Neutral attitude adjustable via software
Attitude input from integrated IMU
Attitude input from external IR sensors (optional)
Turn and climb rate display
G-force display
Adjustable artificial horizon size and position
Autopilot controls four servo output channels for regular airplanes with elevator, aileron, throttle and rudder. Supports differential ailerons airplanes and flying wings with elevons
Barometric altitude, variometer, pressure
All parameters on the screen redraw at 50-60Hz, high refresh rate for smooth relaxing display
