Hier werden die Unterschiede zwischen zwei Versionen angezeigt.
Beide Seiten der vorigen RevisionVorhergehende ÜberarbeitungNächste Überarbeitung | Vorhergehende Überarbeitung | ||
modellbau:planes:5_250 [2022/01/26] – hermenj | modellbau:planes:5_250 [2022/05/04] (aktuell) – [Pics:] hermenj | ||
---|---|---|---|
Zeile 2: | Zeile 2: | ||
< | < | ||
- | {{ : | + | {{ : |
< | < | ||
* Motor Dist. Diag: 200mm | * Motor Dist. Diag: 200mm | ||
* Weight: 175g / 255g with 3S650 | * Weight: 175g / 255g with 3S650 | ||
- | * Flightcontroller: | + | * Flightcontroller: |
- | * Motors: 4x [[bg> | + | * Motors: 4x [[bg> |
* RX: [[bg> | * RX: [[bg> | ||
* Battery: | * Battery: | ||
- | * Frame: | + | * Frame: |
* FPV: [[bg> | * FPV: [[bg> | ||
* FlightTime: | * FlightTime: | ||
Zeile 19: | Zeile 19: | ||
As its winter in Germany, i took it to the indoor flying. Hovers at ~10% of throttle and the fist very short throttle push fired it into the ceiling. Power is overwhelming, | As its winter in Germany, i took it to the indoor flying. Hovers at ~10% of throttle and the fist very short throttle push fired it into the ceiling. Power is overwhelming, | ||
- | So far i was only able to fly it indoors, most on 2-3S. It flies so stable and is so quite on 2S, can't wait to test the 4S beat outside. | + | So far i was only able to fly it indoors, most on 2-3S. It flies so stable and is so quite on 2S, can't wait to test the 4S beast outside. |
===== Pics: ===== | ===== Pics: ===== | ||
+ | ==== 5" ==== | ||
{{gallery>: | {{gallery>: | ||
+ | |||
+ | |||
+ | ==== 3" ==== | ||
+ | |||
+ | {{gallery>: | ||
+ | |||
+ | |||
Zeile 35: | Zeile 43: | ||
# | # | ||
+ | # diff all | ||
+ | # version | ||
+ | # Betaflight / STM32F405 (S405) 4.2.8 Mar 19 2021 / 21:00:59 (norevision) MSP API: 1.43 | ||
+ | # config: manufacturer_id: | ||
+ | |||
+ | # start the command batch | ||
+ | batch start | ||
+ | |||
+ | # reset configuration to default settings | ||
+ | defaults nosave | ||
+ | |||
+ | board_name JHEF405 | ||
+ | manufacturer_id JHEF | ||
+ | mcu_id 003c00423548500720313753 | ||
+ | signature | ||
+ | |||
+ | # name: LOW BATTERY | ||
+ | |||
+ | # feature | ||
+ | feature -RX_PARALLEL_PWM | ||
+ | feature TELEMETRY | ||
+ | |||
+ | # beacon | ||
+ | beacon RX_LOST | ||
+ | beacon RX_SET | ||
+ | |||
+ | # serial | ||
+ | serial 2 1 115200 57600 0 115200 | ||
+ | serial 5 64 115200 57600 0 115200 | ||
+ | |||
+ | # aux | ||
+ | aux 0 0 0 1700 2100 0 0 | ||
+ | aux 1 1 1 900 1300 0 0 | ||
+ | aux 2 2 1 1300 1700 0 0 | ||
+ | aux 3 13 3 1700 2100 0 0 | ||
+ | aux 4 35 2 1700 2100 0 0 | ||
+ | |||
+ | # master | ||
+ | set acc_calibration = 6,-26,38,1 | ||
+ | set rssi_channel = 15 | ||
+ | set serialrx_provider = CRSF | ||
+ | set motor_pwm_protocol = DSHOT600 | ||
+ | set align_board_yaw = 90 | ||
+ | set vbat_scale = 114 | ||
+ | set ibata_scale = 108 | ||
+ | set report_cell_voltage = ON | ||
+ | set osd_warn_rssi = ON | ||
+ | set osd_warn_dji = ON | ||
+ | set osd_vbat_pos = 2419 | ||
+ | set osd_rssi_pos = 2197 | ||
+ | set osd_link_quality_pos = 121 | ||
+ | set osd_rssi_dbm_pos = 89 | ||
+ | set osd_tim_2_pos = 407 | ||
+ | set osd_flymode_pos = 2183 | ||
+ | set osd_vtx_channel_pos = 65 | ||
+ | set osd_crosshairs_pos = 2287 | ||
+ | set osd_current_pos = 2374 | ||
+ | set osd_mah_drawn_pos = 2406 | ||
+ | set osd_craft_name_pos = 2224 | ||
+ | set osd_warnings_pos = 14794 | ||
+ | set osd_avg_cell_voltage_pos = 2387 | ||
+ | set osd_stat_max_spd = OFF | ||
+ | set osd_stat_bbox = OFF | ||
+ | set osd_stat_bb_no = OFF | ||
+ | set gyro_1_align_yaw = 900 | ||
+ | set name = LOW BATTERY | ||
+ | |||
+ | profile 0 | ||
+ | |||
+ | profile 1 | ||
+ | |||
+ | profile 2 | ||
+ | |||
+ | # restore original profile selection | ||
+ | profile 0 | ||
+ | |||
+ | rateprofile 0 | ||
+ | |||
+ | rateprofile 1 | ||
+ | |||
+ | rateprofile 2 | ||
+ | |||
+ | rateprofile 3 | ||
+ | |||
+ | rateprofile 4 | ||
+ | |||
+ | rateprofile 5 | ||
+ | |||
+ | # restore original rateprofile selection | ||
+ | rateprofile 0 | ||
+ | |||
+ | # save configuration | ||
+ | save | ||
+ | # | ||
</ | </ | ||
Ich garantiere bei meinen Bauberichten und Teilelisten keine Vollständigkeit etc...es wird aus den Teilen gebastelt die gerade herumliegen.
Bitte keine Anfragen zum Bau/Fräsen von Frames, Teilen oder sonstigen Aufträgen. Ich betreibe die Seite rein als Hobby und nutze die zur Verfügung stehende Zeit gerne für meine eigenen Projekte.
Bei einigen Projekten werde ich zu gegebener Zeit die Pläne veröffentlichen - aber auch hier lasse ich mich ungern hetzten ;-)
No waranties for completeness of any contructions, part lists etc.. I build from party i have just lying around in my workshop.
Please, No requests to buy frames, builds, etc.. I run this page in my spare-time and as hobby only. Want to keep my free time to work on my own projects - sorry
I will release the plans for some build at some point in time, but again, please don't ask for unreleased plans, i don't want to get rushed ;-)