der-frickler.net

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Sie befinden sich hier: der-Frickler.net » RC Models » Flying Stuff » 5" 250g
modellbau:planes:5_250
created: 2022/01 mod:2022/05

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen RevisionVorhergehende Überarbeitung
Nächste Überarbeitung		Vorhergehende Überarbeitung
modellbau:planes:5_250 [2022/01/26] – [Settings:] hermenjmodellbau:planes:5_250 [2022/05/04] (aktuell) – [Pics:] hermenj
Zeile 6: Zeile 6:
     * Motor Dist. Diag: 200mm     * Motor Dist. Diag: 200mm
     * Weight: 175g / 255g with 3S650     * Weight: 175g / 255g with 3S650
-    * Flightcontroller: [[bg>Upgrade-25_5x25_5mm-JHEMCU-GHF411AIO-Pro-F4-OSD-Flight-Controller-w-or-5V-9V-BEC-Built-in-35A-BL_S-3-6S-4in1-ESC-Support-DJI-Air-Unit-for-Whoop-Toothpick-FPV-Racing-Drone-p-1652742.html|JHEMCU GHF411AIO Pro F4 ]]  +    * Flightcontroller: [[http://jhemcu.com/e_productshow/?17-JHEMCU-GHF411AIO-F4-OSD-FLIGHT-CONTROLLER-BUILT-IN-30A-BL_S-2-4S-4IN1-ESC-FOR-TOOTHPICK-17.html|JHEMCU GHF411 Pro]] for 5_250 [[bg>25_5x25_5mm-JHEMCU-GHF405AIO-F4-OSD-Flight-Controller-w-or-5V-BEC-Current-Sensor-Built-in-35A-BLheli_S-3-6S-4in1-Brushless-ESC-for-Flyegg-Toothpick-RC-Drone-FPV-Racing-p-1751034.html|JHEMCU GHF405AIO]] for 3_250 and Kalle 
-    * Motors: 4x [[bg>FlashHobby-King-K2004-2004-1750KV-1900KV-2100KV-4-6S-or-3150KV-3-4S-Brushless-Motor-for-RC-Drone-FPV-Racing-p-1810363.html|FlashHobby King K2004 3150KV]] with [[bg>2-Pairs-GEMFAN-3016-3-Inch-3-blade-PC-Propeller-1_5mm-or-2mm-Hole-for-Hurricane-Toothpick-RC-Drone-FPV-Racing-p-1609433.html|GEMFAN 3016]] Props.+    * Motors: 4x [[bg>FlashHobby-King-K2004-2004-1750KV-1900KV-2100KV-4-6S-or-3150KV-3-4S-Brushless-Motor-for-RC-Drone-FPV-Racing-p-1810363.html|FlashHobby King K2004 3150KV]] with [[https://n-factory.de/HQProp-Durable-T5X3-Grey|HQProp T5x3]] Props.
     * RX: [[bg>https://www.banggood.com/0_42g-Happymodel-2_4G-ExpressLRS-EP1-Nano-High-Refresh-Rate-Ultra-small-Long-Range-RC-Receiver-for-RC-Drone-p-1835181.html|Happymodel EP1 eLRS Receiver]]     * RX: [[bg>https://www.banggood.com/0_42g-Happymodel-2_4G-ExpressLRS-EP1-Nano-High-Refresh-Rate-Ultra-small-Long-Range-RC-Receiver-for-RC-Drone-p-1835181.html|Happymodel EP1 eLRS Receiver]]
     * Battery:  [[https://chinahobbyline.com/shop/detail/15|CNHL MiniStar 850mAh 11.1V 3S 70C]] or better [[https://hobbyking.com/de_de/turnigy-650mah-4s-65c-lipo-pack-w-xt30.html|650mAh 4S]]     * Battery:  [[https://chinahobbyline.com/shop/detail/15|CNHL MiniStar 850mAh 11.1V 3S 70C]] or better [[https://hobbyking.com/de_de/turnigy-650mah-4s-65c-lipo-pack-w-xt30.html|650mAh 4S]]
-    * Frame: +    * Frame: 10x10 CFK RCExplorer Square Tube + 1.5mm CFK CPs
     * FPV: [[bg>Caddx-Nebula-Pro-Nano-Vista-Kit-1080P-to-720P-at-120fps-28ms-or-4KM-1-or-3-Inch-14mm-F2_0-VTX-Camera-for-DJI-Air-Unit-Digital-Goggles-p-1918167.html|Caddx Nebula Pro Nano]]     * FPV: [[bg>Caddx-Nebula-Pro-Nano-Vista-Kit-1080P-to-720P-at-120fps-28ms-or-4KM-1-or-3-Inch-14mm-F2_0-VTX-Camera-for-DJI-Air-Unit-Digital-Goggles-p-1918167.html|Caddx Nebula Pro Nano]]
     * FlightTime:      * FlightTime: 
Zeile 19: Zeile 19:
 As its winter in Germany, i took it to the indoor flying. Hovers at ~10% of throttle and the fist very short throttle push fired it into the ceiling. Power is overwhelming, crash test succeeded ;-) As its winter in Germany, i took it to the indoor flying. Hovers at ~10% of throttle and the fist very short throttle push fired it into the ceiling. Power is overwhelming, crash test succeeded ;-)
  
-So far i was only able to fly it indoors, most on 2-3S. It flies so stable and is so quite on 2S, can't wait to test the 4S beat outside.+So far i was only able to fly it indoors, most on 2-3S. It flies so stable and is so quite on 2S, can't wait to test the 4S beast outside.
  
 ===== Pics: ===== ===== Pics: =====
  
 +==== 5" ====
  
 {{gallery>:modellbau:planes:5_250?direct}}  {{gallery>:modellbau:planes:5_250?direct}} 
 +
 +
 +==== 3" ====
 +
 +{{gallery>:modellbau:planes:3_250?direct}}
 +
 +
  
  

Ich garantiere bei meinen Bauberichten und Teilelisten keine Vollständigkeit etc...es wird aus den Teilen gebastelt die gerade herumliegen.
Bitte keine Anfragen zum Bau/Fräsen von Frames, Teilen oder sonstigen Aufträgen. Ich betreibe die Seite rein als Hobby und nutze die zur Verfügung stehende Zeit gerne für meine eigenen Projekte.
Bei einigen Projekten werde ich zu gegebener Zeit die Pläne veröffentlichen - aber auch hier lasse ich mich ungern hetzten ;-)

No waranties for completeness of any contructions, part lists etc.. I build from party i have just lying around in my workshop.
Please, No requests to buy frames, builds, etc.. I run this page in my spare-time and as hobby only. Want to keep my free time to work on my own projects - sorry
I will release the plans for some build at some point in time, but again, please don't ask for unreleased plans, i don't want to get rushed ;-)

modellbau/planes/5_250.1643198671.txt.gz · Zuletzt geändert: 2022/01/26 von hermenj

Seiten-Werkzeuge

Falls nicht anders bezeichnet, ist der Inhalt dieses Wikis unter der folgenden Lizenz veröffentlicht: CC Attribution-Noncommercial-Share Alike 4.0 International
CC Attribution-Noncommercial-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki