created: 2021/09 mod:2021/09

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- modellbau:planes:dragonfrog [2021/09/20] – angelegt hermenj
+++ modellbau:planes:dragonfrog [2021/09/28] (aktuell) – hermenj
@@ Zeile 1: / Zeile 1: @@
-====== dragonfrog ======
+====== Dragon Frog 3inch ======
-====== 3inch 1404 ======
 <columns>
-{{ :modellbau:planes:dragonfrog:dragonfrog.jpg?direct500&direct| }}
+{{ :modellbau:planes:dragon_frog:dragon_frog_004.jpg?direct500&direct| }}
 <newcolumn>
     * Motor Dist. Diag: 139mm
@@ Zeile 11: / Zeile 9: @@
     * Motors: 4x [[bg>Happymodel-EX1404-1404-2750KV-3500KV-3-4S-or-4800KV-3S-1_5mm-Shaft-Brushless-Motor-for-Whoop-RC-FPV-Racing-Drone-p-1789438.html|Happymodel EX1404 4800KV]] with [[bg>2-Pairs-GEMFAN-3016-3-Inch-3-blade-PC-Propeller-1_5mm-or-2mm-Hole-for-Hurricane-Toothpick-RC-Drone-FPV-Racing-p-1609433.html|GEMFAN 3016]] Props.
     * RX: [[bg>https://www.banggood.com/0_42g-Happymodel-2_4G-ExpressLRS-EP1-Nano-High-Refresh-Rate-Ultra-small-Long-Range-RC-Receiver-for-RC-Drone-p-1835181.html|Happymodel EP1 eLRS Receiver]]
-    * Battery:  [[https://chinahobbyline.com/shop/detail/15|CNHL MiniStar 850mAh 11.1V 3S 70C]] or better 650mAh 4S
+    * Battery:  [[https://chinahobbyline.com/shop/detail/15|CNHL MiniStar 850mAh 11.1V 3S 70C]] or better [[https://hobbyking.com/de_de/turnigy-650mah-4s-65c-lipo-pack-w-xt30.html|650mAh 4S]]
     * Frame: [[bg>Dragon-Frog-3-Inch-139mm-Wheelbase-Carbon-Fiber-FPV-Racing-Frame-Kit-compaitble-for-DJI-CADDX-VISTA-p-1661513.html|Dragon Frog 3 Inch]]
     * FPV: [[bg>Caddx-Nebula-Nano-Kit-Vista-HD-Digital-System-5_8GHz-FPV-Transmitter-VTX+2_1mm-150-Degree-720P-60fps-FPV-Camera-AIO-for-DJI-Digital-Unit-Googles-p-1680064.html|Caddx Vista HD]] but with DJI Camera
@@ Zeile 17: / Zeile 15: @@
 </columns>
+Needed a more robust frame were the Cam and VistaHD hidden inside the frame to survive the stone-pit. This one flies quite well and so far survived all of my attempts to destroy it ;_)
 ===== Pics: =====
-{{gallery>:modellbau:planes:dragonfrog?direct}}
+{{gallery>:modellbau:planes:dragon_frog?direct}}
@@ Zeile 29: / Zeile 27: @@
 ===== Settings: =====
+Use [[https://github.com/mbilozub/fpv_custom_mods/tree/master/mods/dji-warning/betaflight|Custom Betaflight]] for BF warnings on DJI OSD
 <code>
+#
+# diff all
+# version
+# Betaflight / STM32F411 (S411) 4.2.8 Mar 19 2021 / 21:01:25 (norevision) MSP API: 1.43
+# config: manufacturer_id: MTKS, board_name: MATEKF411, version: be0c9205, date: 2020-01-15T19:44:32Z
+# start the command batch
+batch start
+# reset configuration to default settings
+defaults nosave
+board_name MATEKF411
+manufacturer_id MTKS
+mcu_id 004e00523235511832333634
+signature
+# name: dragonfrog
+# resources
+resource SERVO 1 A00
+resource LED_STRIP 1 NONE
+resource SERIAL_TX 11 A08
+resource SERIAL_RX 11 A08
+# serial
+serial 0 1 115200 57600 0 115200
+serial 1 64 115200 57600 0 115200
+serial 30 2 115200 57600 0 115200
+# aux
+aux 0 0 0 1700 2100 0 0
+aux 1 1 1 900 1300 0 0
+aux 2 2 1 1300 1700 0 0
+aux 3 13 3 1700 2100 0 0
+# master
+set acc_calibration = 1,-9,-105,1
+set rssi_channel = 16
+set serialrx_provider = CRSF
+set failsafe_switch_mode = STAGE2
+set bat_capacity = 850
+set vbat_scale = 112
+set ibata_scale = 309
+set gps_auto_config = OFF
+set gps_rescue_min_sats = 5
+set gps_rescue_allow_arming_without_fix = ON
 set report_cell_voltage = ON
+set osd_warn_rssi = ON
+set osd_warn_dji = ON
+set osd_cap_alarm = 800
+set osd_vbat_pos = 2419
+set osd_rssi_pos = 2197
+set osd_link_quality_pos = 121
+set osd_rssi_dbm_pos = 89
+set osd_tim_2_pos = 407
+set osd_flymode_pos = 2183
+set osd_vtx_channel_pos = 65
+set osd_crosshairs_pos = 2286
+set osd_current_pos = 2374
+set osd_mah_drawn_pos = 2406
+set osd_craft_name_pos = 2224
+set osd_warnings_pos = 14794
+set osd_avg_cell_voltage_pos = 2387
+set osd_stat_max_spd = OFF
+set osd_stat_bbox = OFF
+set osd_stat_bb_no = OFF
+set gyro_1_align_yaw = 1800
+set name = dragonfrog
+profile 0
+profile 1
+profile 2
+# restore original profile selection
+profile 0
+rateprofile 0
+rateprofile 1
+rateprofile 2
+rateprofile 3
+rateprofile 4
+rateprofile 5
+# restore original rateprofile selection
+rateprofile 0
+# save configuration
 save
+#
 </code>

Ich garantiere bei meinen Bauberichten und Teilelisten keine Vollständigkeit etc...es wird aus den Teilen gebastelt die gerade herumliegen.
Bitte keine Anfragen zum Bau/Fräsen von Frames, Teilen oder sonstigen Aufträgen. Ich betreibe die Seite rein als Hobby und nutze die zur Verfügung stehende Zeit gerne für meine eigenen Projekte.
Bei einigen Projekten werde ich zu gegebener Zeit die Pläne veröffentlichen - aber auch hier lasse ich mich ungern hetzten ;-)

No waranties for completeness of any contructions, part lists etc.. I build from party i have just lying around in my workshop.
Please, No requests to buy frames, builds, etc.. I run this page in my spare-time and as hobby only. Want to keep my free time to work on my own projects - sorry
I will release the plans for some build at some point in time, but again, please don't ask for unreleased plans, i don't want to get rushed ;-)

der-frickler.net

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Unterschiede

Seiten-Werkzeuge