created: 2021/09 mod:2021/09

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- modellbau:planes:feichaof4x1 [2021/09/28] – [Settings:] hermenj
+++ modellbau:planes:feichaof4x1 [2021/09/28] (aktuell) – hermenj
@@ Zeile 2: / Zeile 2: @@
 <columns>
-{{ :modellbau:planes:feichaof4x1:feichaof4x1.jpg?direct500&direct| }}
+{{ :modellbau:planes:feichao_f4_x1:feichao_f4_x1_001.jpg?direct500&direct| }}
 <newcolumn>
     * Motor Dist. Diag: 175mm
@@ Zeile 17: / Zeile 17: @@
 After Crashing my [[modellbau:planes:x4inch|]] and destroying the Vista, Camera and FC, i needed a 4inch replacement that hides the electronics inside the frame. Found this fame on Aliexpress for less than 7€ and just bought 2 for the fun. Well, They are not the lightest, but so far survived all my crashes in the really harsh environment.
-===== Links: =====
+===== Pics: =====
+{{gallery>:modellbau:planes:feichao_f4_x1?direct}}
 ===== Settings: =====
@@ Zeile 23: / Zeile 29: @@
 Use [[https://github.com/mbilozub/fpv_custom_mods/tree/master/mods/dji-warning/betaflight|Custom Betaflight]] for BF warnings on DJI OSD
 <code>
+#
+# Building AutoComplete Cache ... Done!
+#
+# diff all
+# version
+# Betaflight / STM32F7X2 (S7X2) 4.2.9 Jun 14 2021 / 23:22:51 (e097f4ab7) MSP API: 1.43
+# config: manufacturer_id: AIRB, board_name: OMNINXT7, version: c2b8c0d3, date: 2021-06-18T03:42:42Z
+# start the command batch
+batch start
+# reset configuration to default settings
+defaults nosave
+board_name OMNINXT7
+manufacturer_id AIRB
+mcu_id 002a00394e5350122030304e
+signature
+# resources
+resource MOTOR 1 B00
+resource MOTOR 2 B01
+resource MOTOR 3 B05
+resource MOTOR 4 B04
+# feature
+feature -RX_PARALLEL_PWM
+feature RX_SERIAL
+feature TELEMETRY
+# beacon
+beacon RX_LOST
+beacon RX_SET
+# serial
+serial 1 64 115200 57600 0 115200
+serial 5 1 115200 57600 0 115200
+# aux
+aux 0 0 0 1700 2100 0 0
+aux 1 1 1 900 1300 0 0
+aux 2 2 1 1300 1700 0 0
+aux 3 13 3 1700 2100 0 0
+# master
+set acc_calibration = 15,18,-17,1
+set rssi_channel = 16
+set serialrx_provider = CRSF
+set motor_pwm_protocol = DSHOT600
+set vbat_scale = 111
+set report_cell_voltage = ON
+set osd_warn_rssi = ON
+set osd_warn_dji = ON
+set osd_vbat_pos = 2419
+set osd_rssi_pos = 2197
+set osd_link_quality_pos = 121
+set osd_rssi_dbm_pos = 89
+set osd_tim_2_pos = 407
+set osd_flymode_pos = 2183
+set osd_vtx_channel_pos = 65
+set osd_crosshairs_pos = 2287
+set osd_current_pos = 2374
+set osd_mah_drawn_pos = 2406
+set osd_craft_name_pos = 2224
+set osd_warnings_pos = 14794
+set osd_avg_cell_voltage_pos = 2387
+set osd_stat_max_spd = OFF
+set osd_stat_bbox = OFF
+set osd_stat_bb_no = OFF
+set gyro_1_sensor_align = CW90
+set gyro_1_align_yaw = 900
+profile 0
+profile 1
+profile 2
+# restore original profile selection
+profile 0
+rateprofile 0
+rateprofile 1
+rateprofile 2
+rateprofile 3
+rateprofile 4
+rateprofile 5
+# restore original rateprofile selection
+rateprofile 0
+# save configuration
+save
 </code>

Ich garantiere bei meinen Bauberichten und Teilelisten keine Vollständigkeit etc...es wird aus den Teilen gebastelt die gerade herumliegen.
Bitte keine Anfragen zum Bau/Fräsen von Frames, Teilen oder sonstigen Aufträgen. Ich betreibe die Seite rein als Hobby und nutze die zur Verfügung stehende Zeit gerne für meine eigenen Projekte.
Bei einigen Projekten werde ich zu gegebener Zeit die Pläne veröffentlichen - aber auch hier lasse ich mich ungern hetzten ;-)

No waranties for completeness of any contructions, part lists etc.. I build from party i have just lying around in my workshop.
Please, No requests to buy frames, builds, etc.. I run this page in my spare-time and as hobby only. Want to keep my free time to work on my own projects - sorry
I will release the plans for some build at some point in time, but again, please don't ask for unreleased plans, i don't want to get rushed ;-)

der-frickler.net

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Unterschiede

Seiten-Werkzeuge