created: 2021/06 mod:2021/09

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- modellbau:planes:lr43 [2021/06/09] – [LR43] hermenj
+++ modellbau:planes:lr43 [2021/09/02] (aktuell) – hermenj
@@ Zeile 1: / Zeile 1: @@
-====== LR43 ======
+====== LR43 flat ======
+<columns>
+{{:modellbau:planes:lr43_flat:lr43_flat_001.jpg?300&direct| }}
+<newcolumn>
+    * Motor Dist.: 122/106mm
+    * Motor Dist. Diag: 162mm
+    * Weight: 248g incl 3S18650
+    * Flightcontroller: [[bg>16x16mm-JHEMCU-GHF13-AIO-F4-OSD-Flight-Controller-Built-in-13A-Blheli_S-2-4S-4-In-1-Brushless-ESC-for-RC-Drone-FPV-Racing-p-1782009.html|JHEMCU GHF13 AIO ]]
+    * GPS: [[https://de.aliexpress.com/item/4001147538089.html|ATGM336H]] with DIY Dipole Antenna, configured for 5Hz, 57600 baud, wired to FC softserial RX.
+    * Motors: 4x [[http://www.myrcmart.com/rcx-h1304-5000kv-multirotor-brushless-motor-for-120150-frame-75g-p-10009.html|RCX H1304 5000KV]] with [[bg>4-Pairs-Gemfan-Hurricane-4024-2-blade-4-Inch-PC-Propeller-for-1408-1506-Brushless-Motor-RC-Drone-FPV-Racing-p-1657418.html|GemFan Hurricane 4024]] Props.
+    * ESCs: [[bg>16x16mm-JHEMCU-GHF13-AIO-F4-OSD-Flight-Controller-Built-in-13A-Blheli_S-2-4S-4-In-1-Brushless-ESC-for-RC-Drone-FPV-Racing-p-1782009.html|JHEMCU GHF13 AIO ]] DSHOT 13A
+    * RX: [[bg>https://www.banggood.com/0_42g-Happymodel-2_4G-ExpressLRS-EP1-Nano-High-Refresh-Rate-Ultra-small-Long-Range-RC-Receiver-for-RC-Drone-p-1835181.html|Happymodel EP1 eLRS Receiver]]
+    * Battery:  3xLiIon Sony US18650VTC6 3000mAh or LG INR18650-HG2 3000mAh 20A
+    * Thrust: 4x ?
+    * Frame: 1.5mm Carbon Fiber, arms doubled up to 3mm
+    * FPV: [[bg>Caddx-Nebula-Nano-Kit-Vista-HD-Digital-System-5_8GHz-FPV-Transmitter-VTX+2_1mm-150-Degree-720P-60fps-FPV-Camera-AIO-for-DJI-Digital-Unit-Googles-p-1680064.html|Caddx Nebula Nano v2 Kit Vista HD]] ...once it arrives, old analog setup for now.
+    * FlightTime: ?
+</columns>
+V1 down below was flying just fine and hit the sub250g, but i got to curious on the first flight and hammered it against a steel girder - never saw an LiIon pack exploding before - see the pics ;_)
+Well, time to rebuild, but using 1.5mm carbon fiber this time, arms are doubled up to 3mm. That allows for a more dead-cat - less x frame with less props in view.
+===== Pics: =====
+{{gallery>modellbau:planes:lr43_flat?direct}}
+====== LR43 v1 ======
 <columns>
@@ Zeile 9: / Zeile 40: @@
     * Flightcontroller: [[bg>16x16mm-JHEMCU-GHF13-AIO-F4-OSD-Flight-Controller-Built-in-13A-Blheli_S-2-4S-4-In-1-Brushless-ESC-for-RC-Drone-FPV-Racing-p-1782009.html|JHEMCU GHF13 AIO ]]
     * GPS: [[https://de.aliexpress.com/item/4001147538089.html|ATGM336H]] with DIY Dipole Antenna, configured for 5Hz, 57600 baud, wired to FC softserial RX.
-    * Motors: 4x [[http://www.myrcmart.com/rcx-h1304-5000kv-multirotor-brushless-motor-for-120150-frame-75g-p-10009.html|RCX H1304 5000KV]] with [[4-Pairs-Gemfan-Hurricane-4024-2-blade-4-Inch-PC-Propeller-for-1408-1506-Brushless-Motor-RC-Drone-FPV-Racing-p-1657418.html|GemFan Hurricane 4024]] Props.
+    * Motors: 4x [[http://www.myrcmart.com/rcx-h1304-5000kv-multirotor-brushless-motor-for-120150-frame-75g-p-10009.html|RCX H1304 5000KV]] with [[bg>4-Pairs-Gemfan-Hurricane-4024-2-blade-4-Inch-PC-Propeller-for-1408-1506-Brushless-Motor-RC-Drone-FPV-Racing-p-1657418.html|GemFan Hurricane 4024]] Props.
     * ESCs: [[bg>16x16mm-JHEMCU-GHF13-AIO-F4-OSD-Flight-Controller-Built-in-13A-Blheli_S-2-4S-4-In-1-Brushless-ESC-for-RC-Drone-FPV-Racing-p-1782009.html|JHEMCU GHF13 AIO ]] DSHOT 13A
     * RX: [[bg>https://www.banggood.com/0_42g-Happymodel-2_4G-ExpressLRS-EP1-Nano-High-Refresh-Rate-Ultra-small-Long-Range-RC-Receiver-for-RC-Drone-p-1835181.html|Happymodel EP1 eLRS Receiver]]

Ich garantiere bei meinen Bauberichten und Teilelisten keine Vollständigkeit etc...es wird aus den Teilen gebastelt die gerade herumliegen.
Bitte keine Anfragen zum Bau/Fräsen von Frames, Teilen oder sonstigen Aufträgen. Ich betreibe die Seite rein als Hobby und nutze die zur Verfügung stehende Zeit gerne für meine eigenen Projekte.
Bei einigen Projekten werde ich zu gegebener Zeit die Pläne veröffentlichen - aber auch hier lasse ich mich ungern hetzten ;-)

No waranties for completeness of any contructions, part lists etc.. I build from party i have just lying around in my workshop.
Please, No requests to buy frames, builds, etc.. I run this page in my spare-time and as hobby only. Want to keep my free time to work on my own projects - sorry
I will release the plans for some build at some point in time, but again, please don't ask for unreleased plans, i don't want to get rushed ;-)

der-frickler.net

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Unterschiede

Seiten-Werkzeuge