Seitenleiste
Grbl_Esp32 RAMPS Controller
After building some prototype boards for the really great Grbl_Esp32 by bdring i decided to create my own controller pcb. As i had some cheap RAMPS shields laying around, i made a ESP32 pcb that fits below the RAMPS board and replaces the Arduino Mega. The board runs Grbl_Esp32 and is capable of driving up to 5 steppers - if RC-Servos are used, 6-7 Axis are possible. The board should offer a very cheap solution for smal experimental machines with up to 5 Axis or small robotic applications.
Features:
- Fits below the very cheap RAMPS 3D printer board.
- Up to 5 independent Stepper Axis
- Servo 1-4 (instead of Axis 4/5) mapped to the servo outputs of the RAMPS.
- 3 Outputs - Spindle PWM, Coolant 1/2 - mapped to the FET outputs of the RAMPS.
- 6 Inputs on the input header of the RAMPS.
Links
- https://github.com/bdring/Grbl_Esp32 GRBL by bdring for ESP32 incl Wifi and Web Frontend
- https://www.buildlog.net/blog/ bdring's Blog.
Ich garantiere bei meinen Bauberichten und Teilelisten keine Vollständigkeit etc...es wird aus den Teilen gebastelt die gerade herumliegen.
Bitte keine Anfragen zum Bau/Fräsen von Frames, Teilen oder sonstigen Aufträgen. Ich betreibe die Seite rein als Hobby und nutze die zur Verfügung stehende Zeit gerne für meine eigenen Projekte.
Bei einigen Projekten werde ich zu gegebener Zeit die Pläne veröffentlichen - aber auch hier lasse ich mich ungern hetzten ;-)
No waranties for completeness of any contructions, part lists etc.. I build from party i have just lying around in my workshop.
Please, No requests to buy frames, builds, etc.. I run this page in my spare-time and as hobby only. Want to keep my free time to work on my own projects - sorry
I will release the plans for some build at some point in time, but again, please don't ask for unreleased plans, i don't want to get rushed ;-)
Seiten-Werkzeuge
