Benutzer-Werkzeuge

Webseiten-Werkzeuge


technik:corexyportal
created: 2017/09 mod:2019/09

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen RevisionVorhergehende Überarbeitung
Nächste Überarbeitung
Vorhergehende Überarbeitung
technik:corexyportal [2017/11/18] – [Videos] hermenjtechnik:corexyportal [2019/09/12] (aktuell) – [Z-Axis and Mill] hermenj
Zeile 17: Zeile 17:
  
 On the electronics side, the Cheap Arduino Uno with grbl shield does a great Job. GRBL 1.1 was compiled with coreXY support enabled and the homing procedure modified to home the long axis (X) first and the portal (Y) after that. First run tests with the latest UniversalGcodeSender Platform showed a max speed of ~20000mm/min. Nice ;_) On the electronics side, the Cheap Arduino Uno with grbl shield does a great Job. GRBL 1.1 was compiled with coreXY support enabled and the homing procedure modified to home the long axis (X) first and the portal (Y) after that. First run tests with the latest UniversalGcodeSender Platform showed a max speed of ~20000mm/min. Nice ;_)
 +
 +
 +Plans: {{:technik:corexy:corexyportal.zip|CoreXY plans as DXF}} drawn with librecad.
  
  
Zeile 32: Zeile 35:
  
   * [[bg>10M-2GT-6mm-Rubber-Opening-Belt-S2M-GT2-Belt-For-3D-Printer-p-959253.html|10m GT2 Belt]] $10   * [[bg>10M-2GT-6mm-Rubber-Opening-Belt-S2M-GT2-Belt-For-3D-Printer-p-959253.html|10m GT2 Belt]] $10
-  * [[bg>GT2-Pulley-16-Teeth-Bore-5MM-Timing-Gear-Alumium-For-GT2-Belt-Width-6MM-3D-Printer-Accessories-p-1036136.html|2x 16T GT2 Pulley]] $3.50+  * [[https://www.aliexpress.com/item/5PCS-LOT-GT2-16-teeth-fit-for-belt-width-6mm-bore-4mm-5mm-6mm-2GT-16teeth/32804771212.html|16T GT2 Pulleys]] 5mm for NEMA17, 6mm for Pollin NEMA23 $4
   * [[https://www.aliexpress.com/item/5pcs-GT2-Timing-Pulley-20-teeth-Bore-6mm-10mm-for-Width-6mm-GT2-synchronous-belt-2GT/32825956351.html|5x T20 5mm Bore Toothed AND 5x T20 5mm Bore Toothless]] $10   * [[https://www.aliexpress.com/item/5pcs-GT2-Timing-Pulley-20-teeth-Bore-6mm-10mm-for-Width-6mm-GT2-synchronous-belt-2GT/32825956351.html|5x T20 5mm Bore Toothed AND 5x T20 5mm Bore Toothless]] $10
  
Zeile 41: Zeile 44:
   * [[bg>CNC-Shield-UNO-R3-Board-4-X-DRV8825-Driver-Kit-For-Arduino-3D-Printer-p-1134845.html|Arduino Uno + GRBL Shield + DRV8825 Drivers]] $14   * [[bg>CNC-Shield-UNO-R3-Board-4-X-DRV8825-Driver-Kit-For-Arduino-3D-Printer-p-1134845.html|Arduino Uno + GRBL Shield + DRV8825 Drivers]] $14
   * [[bg>10Pcs-CNONC-Micro-Limit-Switch-Roller-Arm-Lever-Subminiature-p-1018689.html|Limit Switches]] $2.6   * [[bg>10Pcs-CNONC-Micro-Limit-Switch-Roller-Arm-Lever-Subminiature-p-1018689.html|Limit Switches]] $2.6
-  * [[bg>JKM-NEMA17-1_842-Hybrid-Stepper-Motor-Two-Phase-40MM48MM-p-933433.html|48mm NEMA 17 Motors]] 2x $12  planed: [[https://www.pollin.de/p/schrittmotor-nanotec-4t5618s2404-a-310727|Nema 23]] 2x 10€+  * [[bg>JKM-NEMA17-1_842-Hybrid-Stepper-Motor-Two-Phase-40MM48MM-p-933433.html|48mm NEMA 17 Motors]] 2x $12  planed: [[https://www.pollin.de/p/schrittmotor-nanotec-4t5618s2404-a-310727|Nema 23]] Pollin Motors have 6mm Axis!! 2x 10€
   * [[https://www.reichelt.de/Kunststoff-Kleingehaeuse/EUROBOX-SW/3/index.html?ACTION=3&GROUPID=7715&ARTICLE=50429|Plastic Enclosure 135x95x45]] 3€   * [[https://www.reichelt.de/Kunststoff-Kleingehaeuse/EUROBOX-SW/3/index.html?ACTION=3&GROUPID=7715&ARTICLE=50429|Plastic Enclosure 135x95x45]] 3€
   * [[https://www.pollin.de/p/steuerleitung-8x0-56-3x2x0-9-5-m-562297|Cable 8x0,56 + 3x2x0.9, 5 m]] 8€   * [[https://www.pollin.de/p/steuerleitung-8x0-56-3x2x0-9-5-m-562297|Cable 8x0,56 + 3x2x0.9, 5 m]] 8€
Zeile 64: Zeile 67:
   * [[bg>120pcs-PCB-M3-Hex-Male-Female-Threaded-Brass-Spacer-Standoffs-Screw-Nut-Assortment-Set-p-1014036.html|25mm M3 Standoffs]]    * [[bg>120pcs-PCB-M3-Hex-Male-Female-Threaded-Brass-Spacer-Standoffs-Screw-Nut-Assortment-Set-p-1014036.html|25mm M3 Standoffs]] 
   * [[bg>9MN-Miniature-Guide-Linear-Support-Rail-Slide-Bearing-Steel-Ball-HolderRetainer-p-1130886.html|MGN9 Linear Rail]] $10   * [[bg>9MN-Miniature-Guide-Linear-Support-Rail-Slide-Bearing-Steel-Ball-HolderRetainer-p-1130886.html|MGN9 Linear Rail]] $10
-  * [[http://www.ebay.de/itm/ACT-Motor-1Stueck-Nema16-Linear-Schrittmotor-16HSL3404-12V-0-01-Step-100mm-/172404018471|ACT 16hsl3404 Linear Stepper Motor]] 20+  * [[https://www.amazon.de/ACT-16HSL3404-Stepper-Motor-Bipolar/dp/B072JGWTG6|ACT 16hsl3404 Linear Stepper Motor]] 15
  
  
Zeile 77: Zeile 80:
 ===== Pics ===== ===== Pics =====
  
-{{gallery>technik:corexy?direct}}+{{gallery>technik:corexy}}
  
  

Ich garantiere bei meinen Bauberichten und Teilelisten keine Vollständigkeit etc...es wird aus den Teilen gebastelt die gerade herumliegen.
Bitte keine Anfragen zum Bau/Fräsen von Frames, Teilen oder sonstigen Aufträgen. Ich betreibe die Seite rein als Hobby und nutze die zur Verfügung stehende Zeit gerne für meine eigenen Projekte.
Bei einigen Projekten werde ich zu gegebener Zeit die Pläne veröffentlichen - aber auch hier lasse ich mich ungern hetzten ;-)

No waranties for completeness of any contructions, part lists etc.. I build from party i have just lying around in my workshop.
Please, No requests to buy frames, builds, etc.. I run this page in my spare-time and as hobby only. Want to keep my free time to work on my own projects - sorry
I will release the plans for some build at some point in time, but again, please don't ask for unreleased plans, i don't want to get rushed ;-)

technik/corexyportal.1511018381.txt.gz · Zuletzt geändert: 2019/08/23 (Externe Bearbeitung)