created: 2016/02 mod:2021/03

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- modellbau:planes:ducty [2017/07/16] – hermenj
+++ modellbau:planes:ducty [2021/03/17] (aktuell) – hermenj
@@ Zeile 4: / Zeile 4: @@
 <columns>
-{{modellbau:planes:ducty:ducty_ng_002.jpg?300&direct| }}
+{{modellbau:planes:ducty:ng:ducty_ng_003.jpg?300&direct| }}
 <newcolumn>
-    * Motorabstand: 66mm
+    * Motor Dist.: 66mm
-    * Motorabstand diagonal: 93mm
+    * Motor Dist. Diag: 93mm
-    * Packmaß: 13x13cm
+    * Outer Dim.: 13x13cm
-    * Gewicht:
+    * Weight: ~100g, 170g with 4S 650mAh
-    * Flightcontroller: [[bg>Betaflight-3_1-F3-6DOF-Mini-Flight-Controller-20x20mm-Integrated-OSD-Built-in-5V-BEC-p-1119503.html|OMNIBUS Betaflight 3.1 F3 6DOF]] with Betaflight
+    * Flightcontroller: [[bg>Betaflight-3_1-F3-6DOF-Mini-Flight-Controller-20x20mm-Integrated-OSD-Built-in-5V-BEC-p-1119503.html|OMNIBUS Betaflight 3.1 F3 6DOF]] with Betaflight - modded with [[myrc>lc-filter-5v-bec-output-super-micro-for-micro-multirotor-26s-1a-current-06g-p-11320.html|Micro BEC]] for 4S
     * Motors: 4x [[myrc>rcx-h1304-4000kv-multirotor-brushless-motor-for-120150-frame-75g-p-9351.html|RCX H1304 4000KV]] with [[bg>4-Pairs-DYS-2435-60mm-4-Blade-Propeller-1_5mm-Mounting-Hole-For-11xx-Motors-80-110-FPV-Racing-Frame-p-1131895.html|DYS-2435]] 4-Blade Props.
     * ESCs: [[bg>Hakrc-20x20mm-15A-Blheli_S-BB2-2-4S-Dshot-4-In-1-ESC-for-Racing-Drone-p-1165086.html|Hakrc 20x20mm 15A Blheli_S BB2 2-4S Dshot 4 In 1]]
     * RX: [[bg>FrSky-XSR-2_4GHz-16CH-ACCST-Receiver-S-Bus-CPPM-Output-Support-X9D-X9E-X9DP-X12S-X-Series-p-1031481.html|FrSky XSR]]
     * Battery: [[http://www.gensace.de/fpv-lipo-battery/tattu-650mah-4s1p-75c-14-8v-lipo-battery-pack.html|Tattu 650mah 4s 75c]]
-    * Schub: 4x g
+    * Thrust: 4x >200g
-    * Frame: 2x 1mm GFK and [[bg>Diatone-M220mm-Aluminum-Standoff-For-Blade-150-180-200-ET-150-Frame-Kits-20PCS-p-986901.html|2x20mm Alu Stand-Offs]] and [[bg>Diatone-M26-Philips-Head-Screws-For-RC-Frame-Kits-Multirotors-20PCS-Per-Bag-p-986907.html|M2xx6 Screws]]
+    * Frame: 2x 1mm GFK and [[bg>Diatone-M220mm-Aluminum-Standoff-For-Blade-150-180-200-ET-150-Frame-Kits-20PCS-p-986901.html|2x20mm Alu Stand-Offs]] and [[bg>Diatone-M26-Philips-Head-Screws-For-RC-Frame-Kits-Multirotors-20PCS-Per-Bag-p-986907.html|M2x6 Screws]]
     * FPV: FPV: [[bg>RunCam-Micro-Swift-600TVL-2_1mm-2_3mm-IR-Blocked-CCD-FPV-Camera-PAL-NTSC-5_6g-p-1144546.html|Runcam Micro]] with [[bg>Eachine-VTX03-Super-Mini-5_8G-72CH-025mW50mw200mW-Switchable-FPV-Transmitter-p-1114206.html|Eachine-VTX03]]
-    * Flugzeit:
+    * Flight Time:
 </columns>
+Well, the last version of the old Ducty was quite OK, crash resistance was great, but it was lacking power...
+I ordered some 1304 motors as a replacement, but while waiting for them i figured out that the ESCs used in the old Ducty might be a part of the problem. The DYS Bl ESCs were just to slow to handle the 4000kv on 3S. Instead of replacing the ESCs as well, i decided to do a completely new build. This time with a 20x204in1 ESC and matching FC.
+BTW. The Frame has ~ 140cm² of material, using the cheaper GFK instead of CFK adds ~10g of weight - acceptable for me.
+==== Fotos: ====
+{{gallery>modellbau:planes:ducty:ng?direct}}
+==== Videos: ====
+==== Links: ====
+  * [[https://www.rcgroups.com/forums/showthread.php?2810576-Betaflight-3-1-F3-6DOF-Mini-Flight-Controller-20x20mm-w-OSD-5V-BEC/page7#post37314816|OMNIBUS Betaflight 3.1 F3 Mod for 4S]]
+  * [[https://www.rcgroups.com/forums/showthread.php?2659706-Frsky-XSR-Receiver-analogue-voltage-input|FrSky XSR A2 Voltage Mod]] with 10k/51k divider
+==== Settings: ====
+==== Motor Specs ====
+''Specification
+    Item name: H1304
+    KV: 4000KV
+    Weight (g): Approx 7.5g
+    Configuration: 9N12P
+    Shaft Diameter: 2mm
+        Out the Shaft is 1.5mm
+    Stator Diameter: 13mm
+    Stator Length: 4mm
+    Motor Dimensions: ΦXX×XXmm
+    No.of Cells(Lipo): 2-4S
+    Internal Resistance: --Ω @ 10V
+    No-Load Current: --A @ 10V
+    Cable Length: ~10cm (Soft AWG)
+    Screw:
+        M2*3 (Base)
+        M2*6 (Top)
+''
@@ Zeile 52: / Zeile 95: @@
 **ACHTUNG: Cleanflight hat/hatte einen Bug bei Nutzung von PPM auf dem CC3D. In Betaflight ist der schon länger gefixt, dafür ist PPM-IN von Pin3 auf Pin8 des Steckers gewandert.**
-===== Fotos: =====
+==== Fotos: ====
 {{gallery>modellbau:planes:ducty?direct}}
-===== Videos: =====
+==== Videos: ====
 Erster Test der letzten Version aus GFK.
@@ Zeile 62: / Zeile 105: @@
-===== Links: =====
+==== Links: ====
-===== Settings: =====
+==== Settings: ====
 **CleanFlight 1.13.0 RC1**

Ich garantiere bei meinen Bauberichten und Teilelisten keine Vollständigkeit etc...es wird aus den Teilen gebastelt die gerade herumliegen.
Bitte keine Anfragen zum Bau/Fräsen von Frames, Teilen oder sonstigen Aufträgen. Ich betreibe die Seite rein als Hobby und nutze die zur Verfügung stehende Zeit gerne für meine eigenen Projekte.
Bei einigen Projekten werde ich zu gegebener Zeit die Pläne veröffentlichen - aber auch hier lasse ich mich ungern hetzten ;-)

No waranties for completeness of any contructions, part lists etc.. I build from party i have just lying around in my workshop.
Please, No requests to buy frames, builds, etc.. I run this page in my spare-time and as hobby only. Want to keep my free time to work on my own projects - sorry
I will release the plans for some build at some point in time, but again, please don't ask for unreleased plans, i don't want to get rushed ;-)

der-frickler.net

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Unterschiede

Seiten-Werkzeuge