der-frickler.net

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Sie befinden sich hier: der-Frickler.net » RC Models » Flying Stuff » 3inch 1404
modellbau:planes:3inch_1404
created: 2021/05 mod:2022/03

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen RevisionVorhergehende Überarbeitung
Nächste Überarbeitung		Vorhergehende Überarbeitung
modellbau:planes:3inch_1404 [2021/09/27] – hermenjmodellbau:planes:3inch_1404 [2022/03/10] (aktuell) – hermenj
Zeile 2: Zeile 2:
  
 <columns> <columns>
-{{ :modellbau:planes:3inch_1404:3inch_1404_013.jpg?direct500&direct| }}+{{ :modellbau:planes:3inch_1404:3inch_1404_021.jpg?direct500&direct| }}
 <newcolumn> <newcolumn>
     * Motor Dist.: 85mm     * Motor Dist.: 85mm
Zeile 11: Zeile 11:
     * RX: [[bg>https://www.banggood.com/0_42g-Happymodel-2_4G-ExpressLRS-EP1-Nano-High-Refresh-Rate-Ultra-small-Long-Range-RC-Receiver-for-RC-Drone-p-1835181.html|Happymodel EP1 eLRS Receiver]]     * RX: [[bg>https://www.banggood.com/0_42g-Happymodel-2_4G-ExpressLRS-EP1-Nano-High-Refresh-Rate-Ultra-small-Long-Range-RC-Receiver-for-RC-Drone-p-1835181.html|Happymodel EP1 eLRS Receiver]]
     * Battery:  [[https://chinahobbyline.com/shop/detail/15|CNHL MiniStar 850mAh 11.1V 3S 70C]]     * Battery:  [[https://chinahobbyline.com/shop/detail/15|CNHL MiniStar 850mAh 11.1V 3S 70C]]
-    * Frame: 2.5mm CFK modified from [[https://www.thingiverse.com/thing:3647138]]+    * Frame: 3mm/2.5mm CFK modified from [[https://www.thingiverse.com/thing:3647138]]
     * FPV: [[bg>Caddx-Nebula-Nano-Kit-Vista-HD-Digital-System-5_8GHz-FPV-Transmitter-VTX+2_1mm-150-Degree-720P-60fps-FPV-Camera-AIO-for-DJI-Digital-Unit-Googles-p-1680064.html|Caddx Nebula Nano v2 Kit Vista HD]]     * FPV: [[bg>Caddx-Nebula-Nano-Kit-Vista-HD-Digital-System-5_8GHz-FPV-Transmitter-VTX+2_1mm-150-Degree-720P-60fps-FPV-Camera-AIO-for-DJI-Digital-Unit-Googles-p-1680064.html|Caddx Nebula Nano v2 Kit Vista HD]]
     * FlightTime:      * FlightTime: 
Zeile 41: Zeile 41:
 Settings for the GHF13 Board Settings for the GHF13 Board
 <code> <code>
-diff all+#  
 + 
 +# diff all
  
 # version # version
Zeile 55: Zeile 57:
 board_name MATEKF411 board_name MATEKF411
 manufacturer_id MTKS manufacturer_id MTKS
-mcu_id 0030005c3130510b30343830+mcu_id 004e00523235511832333634
 signature  signature 
  
-# resources +# name: dragonfrog
-resource SERIAL_TX 11 A00 +
-resource SERIAL_RX 11 A00+
  
-# feature +# resources 
-feature GPS +resource SERVO 1 A00 
-feature LED_STRIP+resource LED_STRIP 1 NONE 
 +resource SERIAL_TX 11 A08 
 +resource SERIAL_RX 11 A08
  
 # serial # serial
-serial 1 1 115200 57600 0 115200+serial 0 1 115200 57600 0 115200 
 +serial 1 64 115200 57600 0 115200
 serial 30 2 115200 57600 0 115200 serial 30 2 115200 57600 0 115200
- 
-# led 
-led 0 9,5::CB:4 
  
 # aux # aux
Zeile 77: Zeile 77:
 aux 1 1 1 900 1300 0 0 aux 1 1 1 900 1300 0 0
 aux 2 2 1 1300 1700 0 0 aux 2 2 1 1300 1700 0 0
-aux 3 46 2 1700 2100 0 0 +aux 3 13 3 1700 2100 0 0
-aux 4 13 3 1700 2100 0 0 +
- +
-# vtxtable +
-vtxtable bands 6 +
-vtxtable channels 8 +
-vtxtable band 1 BOSCAM_A A FACTORY 5865 5845 5825 5805 5785 5765 5745 5725 +
-vtxtable band 2 BOSCAM_B B FACTORY 5733 5752 5771 5790 5809 5828 5847 5866 +
-vtxtable band 3 BOSCAM_E E FACTORY 5705 5685 5665    0 5885 5905    0    0 +
-vtxtable band 4 FATSHARK F FACTORY 5740 5760 5780 5800 5820 5840 5860 5880 +
-vtxtable band 5 RACEBAND R FACTORY 5658 5695 5732 5769 5806 5843 5880 5917 +
-vtxtable band 6 IMD6     I CUSTOM  5732 5765 5828 5840 5866 5740    0    0 +
-vtxtable powerlevels 3 +
-vtxtable powervalues 0 1 2 +
-vtxtable powerlabels 25 100 200+
  
 # master # master
-set acc_calibration = -95,33,-161,1 +set acc_calibration = 1,-9,-105,1
-set min_check = 1100+
 set rssi_channel = 16 set rssi_channel = 16
 set serialrx_provider = CRSF set serialrx_provider = CRSF
-set blackbox_device = NONE 
-set dshot_idle_value = 300 
-set motor_poles = 12 
 set failsafe_switch_mode = STAGE2 set failsafe_switch_mode = STAGE2
-set failsafe_procedure = GPS-RESCUE +set bat_capacity = 850 
-set current_meter = NONE+set vbat_scale = 112 
 +set ibata_scale = 309
 set gps_auto_config = OFF set gps_auto_config = OFF
 set gps_rescue_min_sats = 5 set gps_rescue_min_sats = 5
 set gps_rescue_allow_arming_without_fix = ON set gps_rescue_allow_arming_without_fix = ON
 set report_cell_voltage = ON set report_cell_voltage = ON
 +set osd_warn_rssi = ON
 set osd_warn_dji = ON set osd_warn_dji = ON
-set osd_vbat_pos = 14675+set osd_cap_alarm = 800 
 +set osd_vbat_pos = 2419
 set osd_rssi_pos = 2197 set osd_rssi_pos = 2197
-set osd_link_quality_pos = 88 +set osd_link_quality_pos = 121 
-set osd_rssi_dbm_pos = 117 +set osd_rssi_dbm_pos = 89 
-set osd_tim_1_pos = 228 +set osd_tim_2_pos = 407 
-set osd_tim_2_pos = 260 +set osd_flymode_pos = 2183 
-set osd_flymode_pos = 2151 +set osd_vtx_channel_pos = 65 
-set osd_crosshairs_pos = 14574 +set osd_crosshairs_pos = 2286 
-set osd_current_pos = 2342 +set osd_current_pos = 2374 
-set osd_mah_drawn_pos = 2407 +set osd_mah_drawn_pos = 2406 
-set osd_craft_name_pos = 2255 +set osd_craft_name_pos = 2224 
-set osd_display_name_pos = 117 +set osd_warnings_pos = 14794 
-set osd_gps_speed_pos = 2183 +set osd_avg_cell_voltage_pos = 2387 
-set osd_gps_lon_pos = 2444 +set osd_stat_max_spd = OFF 
-set osd_gps_lat_pos = 2440 +set osd_stat_bbox = OFF 
-set osd_gps_sats_pos = 2228 +set osd_stat_bb_no = OFF
-set osd_home_dir_pos = 2383 +
-set osd_home_dist_pos = 2414 +
-set osd_altitude_pos = 2214 +
-set osd_power_pos = 2375 +
-set osd_warnings_pos = 14793 +
-set osd_avg_cell_voltage_pos = 2355 +
-set osd_stat_min_rssi = OFF +
-set osd_stat_min_rssi_dbm = ON +
-set vtx_band = 4 +
-set vtx_channel = 1 +
-set vtx_power = 3 +
-set vtx_freq = 5740+
 set gyro_1_align_yaw = 1800 set gyro_1_align_yaw = 1800
 +set name = dragonfrog
  
 profile 0 profile 0
- 
-# profile 0 
-set p_pitch = 41 
-set i_pitch = 81 
-set d_pitch = 34 
-set f_pitch = 86 
-set p_roll = 38 
-set i_roll = 77 
-set d_roll = 32 
-set f_roll = 81 
-set p_yaw = 41 
-set i_yaw = 81 
-set f_yaw = 81 
-set d_min_roll = 21 
-set d_min_pitch = 23 
  
 profile 1 profile 1

Ich garantiere bei meinen Bauberichten und Teilelisten keine Vollständigkeit etc...es wird aus den Teilen gebastelt die gerade herumliegen.
Bitte keine Anfragen zum Bau/Fräsen von Frames, Teilen oder sonstigen Aufträgen. Ich betreibe die Seite rein als Hobby und nutze die zur Verfügung stehende Zeit gerne für meine eigenen Projekte.
Bei einigen Projekten werde ich zu gegebener Zeit die Pläne veröffentlichen - aber auch hier lasse ich mich ungern hetzten ;-)

No waranties for completeness of any contructions, part lists etc.. I build from party i have just lying around in my workshop.
Please, No requests to buy frames, builds, etc.. I run this page in my spare-time and as hobby only. Want to keep my free time to work on my own projects - sorry
I will release the plans for some build at some point in time, but again, please don't ask for unreleased plans, i don't want to get rushed ;-)

modellbau/planes/3inch_1404.1632765554.txt.gz · Zuletzt geändert: 2021/09/27 von hermenj

Seiten-Werkzeuge

Falls nicht anders bezeichnet, ist der Inhalt dieses Wikis unter der folgenden Lizenz veröffentlicht: CC Attribution-Noncommercial-Share Alike 4.0 International
CC Attribution-Noncommercial-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki